ENGINE - AIR FILTERS

SKU: MC-090-15HE

MWR High Efficient LOW NOISE Airfilter for :

• R1  →  ’15/’26
• MT10  ’15/’21

No modifications needed:

For the R1 MWR developed High Performance Velocity Stacks :

High Performance Velocity Stacks R1 ⇒ ’15/’19 : Part.nr.: MWR-VS-950

High Performance Velocity Stacks R1 ⇒ ’20/’26 : Part.nr.: MWR-VS-960

Use product tags to continue search for correct items.

___________________________________________________

The difference between our street bike and trackbike filters!

The foam material of our racing filters has a much more open structure compared to the foam material of the road filters, resulting in a much shorter maintenance duration. The protection is at the same level as our racing bike filters, but for a shorter period; consequently, maintenance is much shorter but less intensive.

The maintenance frequency for racing track filters is after every two race weekends. Our performance filters for track bikes have a recommended maintenance frequency of once a year… regardless of mileage.

Even if you have ridden 50 km that year, adhere to the guidelines. The priority for the filter is that the foam does not dry out; keep it “wet” with oil. In countries around the equator with high temperatures, the frequency must be reduced to twice a year. The racing bike filter can maintain the normal maintenance frequency.

Only MWR Biodegradable filter oil and Biodegradable filter cleaner may be used to protect the filter against backflow as well. MWR Full Race Airfilter, developed on the track, NOT on a dyno but in real life, bikes with Dataloggers for ultimate performance through new materials and design, protection is at the same level as the filters above, only for a shorter time.

Unlike any other sport filter, all intakes receive the same amount of air with this Racing Airfilter, regardless of engine speed, wind direction, or fairing turbulence. No different fuel allocations between internal and external or front and rear cylinders are required; this is achieved by tuning each cylinder individually.

It makes the bike stronger yet smoother, saving tires and fuel.

Note: The MWR Race Airfilter provides 100% protection, but only for a short period. Check your filter after every race weekend and use only MWR filter oil & cleaner. Ensure you start every race weekend with a well-oiled filter.

This air filter is not designed to reduce intake noise. Reassigning the ECU or the Fuel Control Module is highly recommended.

For the R1 MWR developed High Performance Velocity Stacks : R1 → ’15/’19 and MT10, year 2015-2023 : Part no.: MWR-VS-950 R1 → ’20/’23 : Part no.: MWR-VS-960

• SKU: MC-090-24
• YAMAHA MT09 / SP gen4 
• YAMAHA Tracer 9 / GT ’25/’26 
• YAMAHA XSR900GP ’24/’26 
• YAMAHA XSR900  ’24/’26

High Efficient Airfilter Yamaha R6 ’08/’26

High Efficient Airfilter Yamaha R6 ’08/’26

Compleet nieuwe Velocity stacks voor de Yamaha R1 2015-2019 circuitmotoren (RN32 RN49)

• Set bevat onderste kelken / bovenste kelken en bouten.
• De eerste tests zijn al gedaan door WSBK- en BSB-teams waaruit blijkt dat de MWR-stacks hetzelfde vermogen leveren als de officiële YEC-stacks….
• Ook wordt de installatie-instructie meegeleverd;
• deze wordt ook bij elke set meegeleverd.
• Installatie is hetzelfde als OEM-stacks; er zijn geen aanpassingen nodig.
• De R1-snelheidsstapelset bevat alleen de stapels + installatiebouten.
• Het mechanisme; de bussen (4x push-in) en glijlagers (5x click-on) moeten worden overgezet uit de originele set.
• Gebruik de meegeleverde bouten
• Onderdeelnr.: MWR-VS-950
• Levertijd: 1-3 dagen
• Ook uiteraard leverbaar voor Kawasaki; Suzuki; Honda; Ducati; BMW; Aprilia en alle andere merken circuitmotoren

Special air filter with top cover from MWR Best there is! Therefore more damping by the top plate, which dampens the ram air sound (ram air)! Price includes 21% VAT. Delivery time: 2-5 days Type: 2. High Efficient Airfilter for road & race bikes , designed for inletnoise reduction . The revolutionary High Efficient Airfilter is designed to reduce intake noise and yet more power to deliver . This design of airfilter has shown a reduction of up to 8db of intake noise compared to other sportsfilters. Unlike all other sportsfilter all inlets will get with this High Efficient Airfilter the same quantity of air, regardless the speed of the motorcycle or wind directions . No different fuel-mappings between internal & external or front & rear cilinders are needed , this will be achieved by tuning each cylinder seper . | Caution : | clean and re-oil at least once a year with MWR airfilteroil & cleaner. Remapping the ECU or the Fuel Control Module is highly recommended.

Yamaha R6 2008 onwards Racing Airfilters Different solutions for different purposes 1) The performance air filter, excellent performance and max. protection. Not a copy of the standard version. Filter, always looking for solutions, be it performance, protection or fit. Attention: Clean and re-oil at least once a year with MWR air filter oil and cleaner. It is recommended to reprogram the ECU or fuel control module. 2) The high efficiency air filter for road and racing bikes designed to reduce intake noise. The revolutionary high-efficiency air filter is designed to reduce intake noise while still delivering more power. This air filter design has shown a reduction in intake noise of up to 8 dB compared to other sport filters. Unlike all other sport filters, with this highly efficient air filter all intakes receive the same amount of air, regardless of the speed of the motorcycle or the wind direction. No different fuel allocations are required between inner and outer cylinders or front and rear cylinders. This is achieved by tuning each individual cylinder. Attention: Clean and re-oil at least once a year with MWR air filter oil and cleaner. It is strongly recommended to reinstall the ECU or fuel control module. 3) The Full Race air filter, developed on the track, NOT on a dyno, but in real life, bikes with data loggers for ultimate performance through new materials and design, protection is at the same level as the filters above, just for one shorter time time . Unlike any other sport filter, with this Full Race air filter all intakes receive the same amount of air, regardless of the speed of the motorcycle, the direction of the wind or the turbulence of the fairing. No different fuel allocations are required between inner and outer cylinders or front and rear cylinders. This is achieved by tuning each individual cylinder. It makes the bike stronger but also smoother, saving tires and fuel. Attention: The Full Race air filter provides 100% protection, but only for a short time. Check your filter after every race weekend and only use MWR filter oil and cleaner. Make sure you start every race weekend with a well-oiled filter. This air filter is not designed to reduce intake noise. It is strongly recommended to reinstall the ECU or fuel control module.

SUPERBIKE AIR FILTER MWR Recommended use : Trackbikes/Roadbikes | Part.nr.: MC-110-19 | MWR Performance filter for road use with two layers of foam and inbetween the ingenious system to offer the same amount of air to all four inlets , installation is very simple , place into the cassette with the printed MWR logo to the front It is tailor-made for each motorcycle model trying to make the shape of the filter as large as possible so as to increase the intake air flow to the maximum. This product was created for professional circuit use only. MWR air filters are handmade in Holland with high quality materials and are very long lasting. General characteristics of MWR filters: - Sponges made with hi-tech closed cell material - Exceptional durability (up to 25 washes) - Bases in laser-cut and anodized aluminum - Already oiled with biodegradable oil for maximum engine protection | Part.nr.: MC-110-19 | The ultimate filter for powerwith increased filter surface to create as much as possible airflow , build up with two different foam materials to create equal airflow to all four cylinders , filter must be placed with the cone inside the airbox pointed to the inlets. Attention: we recommend washing / oiling at least every 3 outings on the track (every 50km approximately) the MWR filter for an excellent duration of over 25 washes. Attention: The picture is only indicative

Part.nr.: MC-110-19R | Full race airfilter for track & race use with two layers of foam and inbetween the ingenious system to offer the same amount of air to all four inlets , installation is very simple , place into the cassette with the printed MWR logo to the front. Filter model : Racing Recommended use : Track "Track" is an air filter that offers excellent performance thanks to a greater air flow than the original filter, and also offers greater protection to the engine. This product was created for professional circuit use only. This filter is studied in detail to distribute oxygen equally to all cylinders. MWR air filters are handmade in Holland with high quality materials and are very long lasting. | General characteristics of MWR filters: | Sponges made with hi-tech closed cell material | Exceptional durability (up to 25 washes) | Bases in laser-cut and anodized aluminum | Already oiled with biodegradable oil for maximum engine protection | This filter requires modifications to the airbox for correct assembly | Attention: we recommend washing / oiling at least every 3 outings on the track (every 50km approximately) the MWR filter for an excellent duration of over 25 washes. | Attention: The picture is only indicative.

The difference between our street bike and trackbike filters!

The foam material of our racing filters has a much more open structure compared to the foam material of the road filters, resulting in a much shorter maintenance duration. The protection is at the same level as our racing bike filters, but for a shorter period; consequently, maintenance is much shorter but less intensive.

The maintenance frequency for racing track filters is after every two race weekends. Our performance filters for track bikes have a recommended maintenance frequency of once a year… regardless of mileage.

Even if you have ridden 50 km that year, adhere to the guidelines. The priority for the filter is that the foam does not dry out; keep it “wet” with oil. In countries around the equator with high temperatures, the frequency must be reduced to twice a year. The racing bike filter can maintain the normal maintenance frequency.

Only MWR Biodegradable filter oil and Biodegradable filter cleaner may be used to protect the filter against backflow as well. MWR Full Race Airfilter, developed on the track, NOT on a dyno but in real life, bikes with Dataloggers for ultimate performance through new materials and design, protection is at the same level as the filters above, only for a shorter time.

Unlike any other sport filter, all intakes receive the same amount of air with this Racing Airfilter, regardless of engine speed, wind direction, or fairing turbulence. No different fuel allocations between internal and external or front and rear cylinders are required; this is achieved by tuning each cylinder individually.

It makes the bike stronger yet smoother, saving tires and fuel.

Note: The MWR Race Airfilter provides 100% protection, but only for a short period. Check your filter after every race weekend and use only MWR filter oil & cleaner. Ensure you start every race weekend with a well-oiled filter.

This air filter is not designed to reduce intake noise. Reassigning the ECU or the Fuel Control Module is highly recommended.

For the R1 MWR developed High Performance Velocity Stacks : R1 → ’15/’19 and MT10, year 2015-2023 : Part no.: MWR-VS-950 R1 → ’20/’23 : Part no.: MWR-VS-960