BRAKE - BRAKE DISCS

TK discs are born from the combination of high technologies and the careful choice of materials and treatments.

Designed from experience, built with passion and tested on the track!



There are several strong points of these discs:


MATERIAL

The materials used for production are the result of years of constant research and development on the racing fields; their quality, combined with the particular shape of the disc, also guarantees less wear.

They are all certified materials and the disc production process takes place through a supply chain that allows the traceability of the finished product.

WEIGHT

The particular inclined conical holes increase the material removed compared to traditional ones, reduce the weight of the piece, with a consequent reduction also in the gyroscopic effect:

less weight on the front axle helps the rider and increases the bike's handling.

CLEANING PADS

The equidistant holes make the heat distribution homogeneous (tests carried out have resulted in a reduction in temperature compared to conventional discs of approximately 20%), significantly reducing "overheating fading", while the inclined drilling allows better cleaning of the exhaust from any impurities thanks to the Venturi effect.

This system allows the pads to be used for longer life without losing braking performance.

Thanks to the inclined holes, better heat dissipation and reduction of residual torque on the wheel is ensured.

MODULABLE BRAKING

At the moment of attack, the pad does not suffer impacts (such as a daisy disc or with slots).

The distribution of the holes makes braking smooth, always keeping the pad clean and increasing safety in the wet or in conditions of poor grip.



LOWER PRESSURE

On the test bench and on the track they demonstrated a reduction in pump pressure for the same deceleration.

NB: The photos are purely indicative to demonstrate the quality of the product.

FOR MORE INFORMATION DO NOT HESITATE TO CONTACT US

TK discs are born from the combination of high technologies and the careful choice of materials and treatments.

Designed from experience, built with passion and tested on the track!



There are several strong points of these discs:


MATERIAL

The materials used for production are the result of years of constant research and development on the racing fields; their quality, combined with the particular shape of the disc, also guarantees less wear.

They are all certified materials and the disc production process takes place through a supply chain that allows the traceability of the finished product.

WEIGHT

The particular inclined conical holes increase the material removed compared to traditional ones, reduce the weight of the piece, with a consequent reduction also in the gyroscopic effect:

less weight on the front axle helps the rider and increases the bike's handling.

CLEANING PADS

The equidistant holes make the heat distribution homogeneous (tests carried out have resulted in a reduction in temperature compared to conventional discs of approximately 20%), significantly reducing "overheating fading", while the inclined drilling allows better cleaning of the exhaust from any impurities thanks to the Venturi effect.

This system allows the pads to be used for longer life without losing braking performance.

Thanks to the inclined holes, better heat dissipation and reduction of residual torque on the wheel is ensured.

MODULABLE BRAKING

At the moment of attack, the pad does not suffer impacts (such as a daisy disc or with slots).

The distribution of the holes makes braking smooth, always keeping the pad clean and increasing safety in the wet or in conditions of poor grip.



LOWER PRESSURE

On the test bench and on the track they demonstrated a reduction in pump pressure for the same deceleration.

NB: The photos are purely indicative to demonstrate the quality of the product.

FOR MORE INFORMATION DO NOT HESITATE TO CONTACT US

TK discs are born from the combination of high technologies and the careful choice of materials and treatments.

Designed from experience, built with passion and tested on the track!



There are several strong points of these discs:


MATERIAL

The materials used for production are the result of years of constant research and development on the racing fields; their quality, combined with the particular shape of the disc, also guarantees less wear.

They are all certified materials and the disc production process takes place through a supply chain that allows the traceability of the finished product.

WEIGHT

The particular inclined conical holes increase the material removed compared to traditional ones, reduce the weight of the piece, with a consequent reduction also in the gyroscopic effect:

less weight on the front axle helps the rider and increases the bike's handling.

CLEANING PADS

The equidistant holes make the heat distribution homogeneous (tests carried out have resulted in a reduction in temperature compared to conventional discs of approximately 20%), significantly reducing "overheating fading", while the inclined drilling allows better cleaning of the exhaust from any impurities thanks to the Venturi effect.

This system allows the pads to be used for longer life without losing braking performance.

Thanks to the inclined holes, better heat dissipation and reduction of residual torque on the wheel is ensured.

MODULABLE BRAKING

At the moment of attack, the pad does not suffer impacts (such as a daisy disc or with slots).

The distribution of the holes makes braking smooth, always keeping the pad clean and increasing safety in the wet or in conditions of poor grip.



LOWER PRESSURE

On the test bench and on the track they demonstrated a reduction in pump pressure for the same deceleration.

NB: The photos are purely indicative to demonstrate the quality of the product.

FOR MORE INFORMATION DO NOT HESITATE TO CONTACT US

TK discs are born from the combination of high technologies and the careful choice of materials and treatments.

Designed from experience, built with passion and tested on the track!



There are several strong points of these discs:


MATERIAL

The materials used for production are the result of years of constant research and development on the racing fields; their quality, combined with the particular shape of the disc, also guarantees less wear.

They are all certified materials and the disc production process takes place through a supply chain that allows the traceability of the finished product.

WEIGHT

The particular inclined conical holes increase the material removed compared to traditional ones, reduce the weight of the piece, with a consequent reduction also in the gyroscopic effect:

less weight on the front axle helps the rider and increases the bike's handling.

CLEANING PADS

The equidistant holes make the heat distribution homogeneous (tests carried out have resulted in a reduction in temperature compared to conventional discs of approximately 20%), significantly reducing "overheating fading", while the inclined drilling allows better cleaning of the exhaust from any impurities thanks to the Venturi effect.

This system allows the pads to be used for longer life without losing braking performance.

Thanks to the inclined holes, better heat dissipation and reduction of residual torque on the wheel is ensured.

MODULABLE BRAKING

At the moment of attack, the pad does not suffer impacts (such as a daisy disc or with slots).

The distribution of the holes makes braking smooth, always keeping the pad clean and increasing safety in the wet or in conditions of poor grip.



LOWER PRESSURE

On the test bench and on the track they demonstrated a reduction in pump pressure for the same deceleration.

NB: The photos are purely indicative to demonstrate the quality of the product.

FOR MORE INFORMATION DO NOT HESITATE TO CONTACT US

TK discs are born from the combination of high technologies and the careful choice of materials and treatments.

Designed from experience, built with passion and tested on the track!



There are several strong points of these discs:


MATERIAL

The materials used for production are the result of years of constant research and development on the racing fields; their quality, combined with the particular shape of the disc, also guarantees less wear.

They are all certified materials and the disc production process takes place through a supply chain that allows the traceability of the finished product.

WEIGHT

The particular inclined conical holes increase the material removed compared to traditional ones, reduce the weight of the piece, with a consequent reduction also in the gyroscopic effect:

less weight on the front axle helps the rider and increases the bike's handling.

CLEANING PADS

The equidistant holes make the heat distribution homogeneous (tests carried out have resulted in a reduction in temperature compared to conventional discs of approximately 20%), significantly reducing "overheating fading", while the inclined drilling allows better cleaning of the exhaust from any impurities thanks to the Venturi effect.

This system allows the pads to be used for longer life without losing braking performance.

Thanks to the inclined holes, better heat dissipation and reduction of residual torque on the wheel is ensured.

MODULABLE BRAKING

At the moment of attack, the pad does not suffer impacts (such as a daisy disc or with slots).

The distribution of the holes makes braking smooth, always keeping the pad clean and increasing safety in the wet or in conditions of poor grip.



LOWER PRESSURE

On the test bench and on the track they demonstrated a reduction in pump pressure for the same deceleration.

NB: The photos are purely indicative to demonstrate the quality of the product.

FOR MORE INFORMATION DO NOT HESITATE TO CONTACT US

PAIR OF FLOATING FRONT BRAKE DISCS TK
Model: EVO
Set composed of: Right disc + Left disc

NOTE: Discs compatible with forged rims and carbon rims

TK discs are born from the combination of high technologies and the careful choice of materials and treatments.

Designed from experience, built with passion and tested on the track!



There are several strong points of these discs:


MATERIAL

The materials used for production are the result of years of constant research and development on the racing fields; their quality, combined with the particular shape of the disc, also guarantees less wear.

They are all certified materials and the disc production process takes place through a supply chain that allows the traceability of the finished product.

WEIGHT

The particular inclined conical holes increase the material removed compared to traditional ones, reduce the weight of the piece, with a consequent reduction also in the gyroscopic effect:

less weight on the front axle helps the rider and increases the bike's handling.

CLEANING PADS

The equidistant holes make the heat distribution homogeneous (tests carried out have resulted in a reduction in temperature compared to conventional discs of approximately 20%), significantly reducing "overheating fading", while the inclined drilling allows better cleaning of the exhaust from any impurities thanks to the Venturi effect.

This system allows the pads to be used for longer life without losing braking performance.

Thanks to the inclined holes, better heat dissipation and reduction of residual torque on the wheel is ensured.

MODULABLE BRAKING

At the moment of attack, the pad does not suffer impacts (such as a daisy disc or with slots).

The distribution of the holes makes braking smooth, always keeping the pad clean and increasing safety in the wet or in conditions of poor grip.



LOWER PRESSURE

On the test bench and on the track they demonstrated a reduction in pump pressure for the same deceleration.

NB: The photos are purely indicative to demonstrate the quality of the product.

FOR MORE INFORMATION DO NOT HESITATE TO CONTACT US

BREMBO BRAKE DISCS PAIR T-DRIVE 320

• Model: T-Drive
• Diameter: 320
• product no. 208A98548

Born from the experience gained in SBK and MotoGp, the "T-Drive" disc presents a new coupling between the band and the bell, consisting of 8 "T" pins obtained on the disc and 8 silhouettes on the bell that allow the elimination of the pawls of dragging.

This system guarantees the transmission of the braking torque more effectively and improves resistance to thermomechanical stresses.

The "T-Drive" system allows both radial and axial flotation and reduces the overall weight of the disc, bringing a considerable advantage in driveability.

The band has been optimized both by reducing its height and by redistributing the arrangement of the holes (with differentiated diameters). The bell also contributes substantially to the final result: made of light alloy by CNC machining, designed to guarantee lightness and rigidity.

• SET BREMBO HPK Supersport Brake Discs Suitable for forged aluminum M rims or carbon wheels.
• Product code: 208973767
• Model: SUPER SPORT
• Outer diameter: 320mm
• Inner diameter: 80mm
• Hole Diameter: 8.6mm
• ONLY FOR RACING
• Compatible with original calipers,
• NOT compatible with Brembo low-end racing calipers.
• Brembo Racing SuperSport discs with a thickness of 5.5 mm. they are exactly interchangeable with the originals and suitable to work with both the stock calipers and some Brembo Racing calipers.
• Winners of the SuperSport and SuperStock 1000 World Championships, they are fully floating discs made from a heat-treated martensitic steel brake ring (resistant to any thermo-mechanical stress) and an aluminum alloy bell.
• The coupling between the two components takes place by means of 10 pawls.
• NB: The photo is only indicative

Brembo HPK 310 mm. Brake Discs Yamaha R6 2005-2016

The material used here is identical to the material of the brake discs used by most teams in Superbike - World Championship / Supersport 600 - World Championship and MotoGP.
The extremely robust brake discs ensure absolutely constant braking power under all conditions (especially with the Brembo Z04 brake pads).

The brake discs can be used in combination with the original brake calipers; or with the Brembo brake calipers.

Technical data:

• Interchangeable with the original brake discs (see separate list) 310mm.
  
• Brake ring 34 mm wide (also suitable for the original brake calipers)
  
• Brake disc thickness 5.5 mm
  
• Stainless steel brake ring;
  
• racing material
  
• Inner brake disc made of aluminium; gold
  
• Floating bearing with 10 floats
  
• extremely robust with low wear
  
• for many models with ABE
  
• Fits the following models: R6 2co and 13s (2005-2016)
  
• The photo is for reference only; for more information, please feel free to contact us for delivery/advice.

• High-performance rear brake disc
• 480 grams.
• 220mm.
• exclusive screws
• VAT can be shown for the company
• Also available for other racetrack vehicles on request.
• Fit: | Yamaha R1 2004 onwards
• Yamaha R6 2003 onwards
• Yamaha R3 2015 onwards
• Yamaha R7 2022 onwards
• In stock!

High-performance rear brake disc very light!

• Only 371.6 grams.
• 220mm.
• exclusive screws
• Also available for other racetrack vehicles on request.
• Racing brake disc suitable for BMW S1000RR all years of construction.
• The brake disc is made of high-strength steel and precision-ground.

Yamaha YZF R1 2015-2026 Biting Performance 320mm.

• brake disc For Biting, quality means first of all guaranteeing total and absolute control of each of its products.
• Each disc is dimensionally checked.
• All discs must pass a full series of tests and checks - on size, quality of materials - to ensure that every single product is absolutely perfect.
• Quality is a concept of our company philosophy.
• It does not only concern the discs or the production cycle, but everything that translates into services designed to meet the needs and desires of motorcyclists. | fit also Yamaha R6 2017 onwards | available for most modern Superbike and Supersport 600 Trackbikes | 310/320/330mm. | 6mm. thickness | Delivery time: On request