i2m ABS Emulator R1 2015-2019

Our i2m ABS emulators allow to remove the entire ABS pump and box

• You can use this and the GYTR wiring harness and original wiring harness to remove the ABS pump.
• Contact ABS consultants for wiring diagrams and OEM replacements.
• We have saved a lot and solved problems on the track.
• You must also meet OEM standards.
• The oem brakelines cannot be used.
• We have steel brake lines available from stock for the front brake and rear brake.
• There are remnants in the category: Brakes (for R1).
• Our removers have all the electronic circuits apt to avoid any error in the central unit.
• Their mounting is completely plug&play and there’s no need to modify the origin wiring: you just need to unplug the ABS and plug in our emulator.
• This saves up to 1.4kg! Our ABS removers copy exctly the shape of the original ABS engine plug and replicate the couplings.
• No manual intervention needed, no wire to add, no welding to be done, no wiring to be cut: no risk to make a mistake.
• Commonly, by completely removing the original ABS system you also loose all Traction Control functions, and it is not acceptable on modern sport bikes. Alike , if the emulator is low quality, it can trigger errors on the central unit.
• Our remover, instead, copies exactly all the necessary interface and allows all the others original system their correct operation.
• This product is designed for exclusive use ON TRACK.
• DO NOT use this product on public roads.
• Available models: Suzuki GSXR 1000 L7-L9, Yamaha R3 2019, Yamaha R6 17-26, Yamaha R7 2022, Yamaha R1 15-19, Yamaha R1 2020 onwards / R1M 2020, euro 305,00 (suspension emulator + 50,00 euro’s) | Kawasaki ZX10R 16-19 | Kawasaki Ninja 400 | Aprilia RSV4 APRC 13-16 | MV F3 675/800