Products

Ducati Large Superbike Race water radiator with oil point radiator + kit

Suitable for Ducati SUPERBIKE models 748 916 996 998

The kit consists of:

• Upper Large water radiator, brand: JM
• Lower thick oil point radiator, brand: JM
• tubes, blue silicone hoses, and hose clamps.
• The original oil lines can be used.
• 1 year warranty
• Brand: JMRaceradiators
• It is necessary to make some modifications to the engine/wiring harness.
• Fits and works perfectly.
• For track use only
• Not suitable for street bikes as it does not fit with street fairings and a fan cannot be mounted.
• Minor modifications are possible, such as mounting a filler cap, at no additional cost.
• This large race radiator comes standard with a square plastic coolant tank. The capacity is huge, and with this engine, your tuned engine block stays at a maximum of 80-85 degrees even on hot days during Ducati Club Races at Assen.
• In the past, tuners like Biggelaar purchased these radiators to mount on their tuned motorcycles.
• Please contact us if you have any questions.
• Installation in our workshop is possible.

Ducati Large Race Water Radiator with Oil Point Radiator Kit

This kit is ideally suited for the fast track rider who desires full power on hot days.
Proper cooling of your track bike is of great importance for performance and maintaining the quality of your (Motul 300V) race oil.
In general, therefore: Preservation of your engine!

• Do you have a tuned engine?
• Then this radiator is indispensable!
  
• With this kit, the coolant temperature on hot days will be 80-85 degrees.

The radiator is supplied including:

• Blue silicone hose set
• Hose clamp set for mounting all silicone hoses.
• 2.0 bar race radiator cap
• 2 aluminum tubes
• Fits and works perfectly
• Square plastic expansion water tank in holder
• For track use only.
• This kit cooler does not fit with street fairings!
• 1 year warranty
• Small modifications are possible, such as mounting a filler cap, at no additional cost.
• This large racing radiator comes standard with a coolant tank.
• With this radiator, the temperature remains well below 85 degrees on hot days.
• We always recommend installing racing mesh. Check the menu under “Accessories-Radiators”.
• Delivery time: 12-14 weeks after order.
• We build on request. We have no stock for this radiator.

Ducati V2 oil/water additional JM radiator cools many times better than the original water radiator. On hot days, this radiator keeps the cooling water at least 13 degrees lower, and sometimes even 20 degrees.

The efficiency of oil cooling is very high. The kit consists of: Complete set as shown in the photos with 1 cooling water hose, oil hoses with (blue) couplings for oil hoses, hose clamps, adapter plate that replaces the heat exchanger and an O-ring gasket for the adapter plate.

• We have the oil pipes with the blue gland made exclusively in a factory where pipes are pressed and made for the aircraft industry.
• The best quality!

The kit contains a complete set as on the pictures with:

• 1 year warranty
• 1 silicone hose in blue
• 2 hose clamps
• 2 suitable custom-made oil pipes with insulation
• 1 adapter plate with bolts for mounting
• 2 oil connectors to be mounted in the oil adapter plate
  
• 1 Ducati (oem) rubber gasket for adapter plate
  
• Installation manuel
• Ready-made, suitable oil pipes are supplied with insulation material (up to 300 gr.) that have the correct length for perfect installation. (See pictures)
• Fits and works perfectly.
• Does NOT fit with roadfairings or roadbikes.
• Does fit with SPARK Exhaustsystem and other brand. Please mention brand exhaust system when you order!
• When mounted you CANNOT mount the fan
  
• For track use only
• Stainless steel racing mesh guard is mounted
• Delivery time: 12-14 weeks after order. We build on request!

Product Information "Dunlop KR 106-109-108 Slick"

Whether at the Isle of Man TT, the Endurance World Championship (EWC), or the Moto2 World Championship (KR variant), the KR109 regularly proves its performance in the world's toughest professional racing series.

Extreme performance characteristics for boundless confidence and fast lap times

Tread pattern and mold perfected over 15 years for ultimate feedback and progressive transitions between extreme lean angles.

• Article No.: MD10301003.11
  
• EAN: 9743
  
• Manufacturer No.: 633782

Target Running Pressure:

Product Information "Dunlop KR 106-109-108 Slick"

Whether at the Isle of Man TT, the Endurance World Championship (EWC), or the Moto2 World Championship (KR variant), the KR109 regularly proves its performance in the world's toughest professional racing series.

Extreme performance characteristics for boundless confidence and fast lap times

Tread pattern and mold perfected over 15 years for ultimate feedback and progressive transitions between extreme lean angles.

• Article No.: MD10301003.12
  
• EAN: 9813
  
• Manufacturer No.: 633803

Target Running Pressure:

Product Information "Dunlop KR 106-109-108 Slick"

Whether at the Isle of Man TT, the Endurance World Championship (EWC), or the Moto2 World Championship (KR variant), the KR109 regularly proves its performance in the world's toughest professional racing series.

Extreme performance characteristics for boundless confidence and fast lap times

Tread pattern and mold perfected over 15 years for ultimate feedback and progressive transitions between extreme lean angles.

• Article No.: MD10301003.13
  
• EAN: 343
  
• Manufacturer No.: 633804

Target Running Pressure:

Product Information "Dunlop KR 106-109-108 Slick"

Whether at the Isle of Man TT, the Endurance World Championship (EWC), or the Moto2 World Championship (KR variant), the KR109 regularly proves its performance in the world's toughest professional racing series.

Extreme performance characteristics for boundless confidence and fast lap times

Tread pattern and mold perfected over 15 years for ultimate feedback and progressive transitions between extreme lean angles.

• Article No.: MD10301003.14
  
• EAN: 302
  
• Manufacturer No.: 633805

Target Running Pressure:

Product Information "Dunlop KR 106-109-108 Slick"

Whether at the Isle of Man TT, the Endurance World Championship (EWC), or the Moto2 World Championship (KR variant), the KR109 regularly proves its performance in the world's toughest professional racing series.

Extreme performance characteristics for boundless confidence and fast lap times

Tread pattern and mold perfected over 15 years for ultimate feedback and progressive transitions between extreme lean angles.

Target Running Pressure:

Product Information "Dunlop KR 106-109-108 Slick"

Whether at the Isle of Man TT, the Endurance World Championship (EWC), or the Moto2 World Championship (KR variant), the KR109 regularly proves its performance in the world's toughest professional racing series.

Extreme performance characteristics for boundless confidence and fast lap times

Tread pattern and mold perfected over 15 years for ultimate feedback and progressive transitions between extreme lean angles.

Target Running Pressure:

Product Information "Dunlop KR 106-109-108 Slick"

Whether at the Isle of Man TT, the Endurance World Championship (EWC), or the Moto2 World Championship (KR variant), the KR109 regularly proves its performance in the world's toughest professional racing series.

Extreme performance characteristics for boundless confidence and fast lap times

Tread pattern and mold perfected over 15 years for ultimate feedback and progressive transitions between extreme lean angles.

Target Running Pressure:

Product Information "Dunlop KR 106-109-108 Slick"

Whether at the Isle of Man TT, the Endurance World Championship (EWC), or the Moto2 World Championship (KR variant), the KR109 regularly proves its performance in the world's toughest professional racing series.

Extreme performance characteristics for boundless confidence and fast lap times

Tread pattern and mold perfected over 15 years for ultimate feedback and progressive transitions between extreme lean angles.

Target Running Pressure:

Product Information "Dunlop KR 106-109-108 Slick"

Whether at the Isle of Man TT, the Endurance World Championship (EWC), or the Moto2 World Championship (KR variant), the KR109 regularly proves its performance in the world's toughest professional racing series.

Extreme performance characteristics for boundless confidence and fast lap times

Tread pattern and mold perfected over 15 years for ultimate feedback and progressive transitions between extreme lean angles.

Target Running Pressure:

Product Information "Dunlop KR 106-109-108 Slick"

Whether at the Isle of Man TT, the Endurance World Championship (EWC), or the Moto2 World Championship (KR variant), the KR109 regularly proves its performance in the world's toughest professional racing series.

Extreme performance characteristics for boundless confidence and fast lap times

Tread pattern and mold perfected over 15 years for ultimate feedback and progressive transitions between extreme lean angles.

Target Running Pressure:

Product Information "Dunlop KR 106-109-108 Slick"

Whether at the Isle of Man TT, the Endurance World Championship (EWC), or the Moto2 World Championship (KR variant), the KR109 regularly proves its performance in the world's toughest professional racing series.

Extreme performance characteristics for boundless confidence and fast lap times

Tread pattern and mold perfected over 15 years for ultimate feedback and progressive transitions between extreme lean angles.

Target Running Pressure:

Product Information "Dunlop KR 106-109-108 Slick"

Whether at the Isle of Man TT, the Endurance World Championship (EWC), or the Moto2 World Championship (KR variant), the KR109 regularly proves its performance in the world's toughest professional racing series.

Extreme performance characteristics for boundless confidence and fast lap times

Tread pattern and mold perfected over 15 years for ultimate feedback and progressive transitions between extreme lean angles.

Target Running Pressure:

Product Information "Dunlop KR 106-109-108 Slick"

Whether at the Isle of Man TT, the Endurance World Championship (EWC), or the Moto2 World Championship (KR variant), the KR109 regularly proves its performance in the world's toughest professional racing series.

Extreme performance characteristics for boundless confidence and fast lap times

Tread pattern and mold perfected over 15 years for ultimate feedback and progressive transitions between extreme lean angles.

Target Running Pressure:

Product Information "Dunlop KR 106-109-108 Slick"

Whether at the Isle of Man TT, the Endurance World Championship (EWC), or the Moto2 World Championship (KR variant), the KR109 regularly proves its performance in the world's toughest professional racing series.

Extreme performance characteristics for boundless confidence and fast lap times

Tread pattern and mold perfected over 15 years for ultimate feedback and progressive transitions between extreme lean angles.

Target Running Pressure:

Product Information "Dunlop KR 106-109-108 Slick"

Whether at the Isle of Man TT, the Endurance World Championship (EWC), or the Moto2 World Championship (KR variant), the KR109 regularly proves its performance in the world's toughest professional racing series.

Extreme performance characteristics for boundless confidence and fast lap times

Tread pattern and mold perfected over 15 years for ultimate feedback and progressive transitions between extreme lean angles.

Target Running Pressure:

Forté Bio Degreaser & Cooling System Flush is a complete and complex cooling system cleaner that contains oil, removes sludge, gel, rust, corrosion and scale from cooling systems, reduces heat transfer and Cooling capacity of the cooling system is restored. Forté Bio Degreaser & Cooling System Flush offers the following benefits: • Removes oil, sludge, scale and corrosion deposits from the cooling system. • The cleaning of the coolant level in the expansion tank can be checked again. • Restores the heat transfer capacity of the cooling system. • A clean cooling system reduces the thermal load on the engine oil. • Dissolves gel formations formed in oven heaters at low temperatures. • Reduces the likelihood of radiator clogs and overheating problems. • Prevents plastic water pump impellers from being attacked by oil and mud. Forté Bio Degreaser & Cooling System Flush is compatible with all antifreeze and coolant formulations. Forté recommends cleaning the cooling system at least every 2 years to ensure the heat transfer in the cooling system and thus the cooling performance. To support the new coolant's additive package, Forté recommends the addition of Forté Advanced Radiator Stop Leak, which conditions the coolant and improves protection against leaks, corrosion and cavitation. Forté Bio Degreaser & Cooling System Flush should preferably be used with water. Application Add 8% of the coolant volume, 1 bottle is sufficient for medium-sized cooling systems. Shake well before use. Click here for the user manual in PDF format. (https://cdn.webshopapp.com/shops/93056/files/241568855/bio-degreaser-cooling-system-flush.pdf)

Forté Bio Degreaser & Cooling System Flush is een complete en complexe koelsysteemreiniger die olie, verwijdert slib, gel, roest, corrosie en aanslag van koelsystemen, vermindert warmteoverdracht en De koelcapaciteit van het koelsysteem wordt hersteld. Forté Bio Ontvetter & Koelsysteem Flush biedt de volgende voordelen:

• Verwijdert olie-, slib-, ketelsteen- en corrosieafzettingen uit het koelsysteem.
• De reiniging van het koelvloeistofpeil in het expansievat kan weer gecontroleerd worden.
• Herstelt de warmteoverdrachtscapaciteit van het koelsysteem.
• Een schoon koelsysteem vermindert de thermische belasting van de motorolie.
• Lost gelformaties op die gevormd zijn in ovenverwarmers bij lage temperaturen.
• Vermindert de kans op radiatorverstoppingen en oververhittingsproblemen.
• Voorkomt dat kunststof waterpompwaaiers worden aangetast door olie en modder.
• Forté Bio Degreaser & Cooling System Flush is compatibel met alle antivries- en koelmiddelformuleringen.
• Forté raadt aan om het koelsysteem minimaal om de 2 jaar te reinigen om de warmteoverdracht in het koelsysteem en daarmee de koelprestaties te waarborgen.
• Om het additievenpakket van de nieuwe koelvloeistof te ondersteunen, adviseert Forté de toevoeging van Forté Advanced Radiator Stop Leak, die de koelvloeistof conditioneert en de bescherming tegen lekken, corrosie en cavitatie verbetert.
• Forté Bio Ontvetter & Cooling System Flush bij voorkeur met water gebruiken.
• Toepassing Voeg 8% van het koelvloeistofvolume toe, 1 fles is voldoende voor middelgrote koelsystemen.
• Goed schudden voor gebruik.
• Klik hier voor de gebruikershandleiding in PDF formaat.

 (https://cdn.webshopapp.com/shops/93056/files/241568855/bio-degreaser-cooling-system-flush.pdf)

Reduce oil consumption What Forté Top End Treatment does is simple; it keeps the engine clean inside so that the engine oil can work optimally. It may seem logical, but it is not. Today's long service intervals in particular have a big impact on oil life. Not to mention the start-stop systems and other inventions that make it particularly difficult for the oil to fulfill its function. In a nutshell, that means making sure your system is and stays clean, and this product will help you do that. The use of Top End Treatment generally goes hand in hand with our next generation rinse engine. Only then can he really do his job. Namely as a supplement to new engine oil in a clean engine. If you don't, your treatment is not complete. you forget something

Vermindert het olieverbruik! Wat Forté Top End Treatment doet is eenvoudig; het houdt de binnenkant van de motor schoon zodat de motorolie optimaal kan functioneren. Dat klinkt misschien logisch, maar dat is het niet. Vooral de lange onderhoudsintervallen van tegenwoordig hebben een grote invloed op de levensduur van de olie. Om nog maar te zwijgen van start-stop-systemen en andere uitvindingen die het voor de olie extreem moeilijk maken om zijn functie uit te voeren. In een notendop betekent dit dat u ervoor moet zorgen dat uw systeem schoon is en blijft, en dit product zal daarbij helpen. Het gebruik van Top End Treatment gaat meestal hand in hand met onze New Generation Motor Flush. Alleen dan kan het echt zijn werk doen. Namelijk als aanvulling op de nieuwe motorolie in een schone motor. Doet u dit niet, dan is uw behandeling niet volledig.

The VRC radial brake pump with vertical adjustment and 17mm Piston diameter, is characterized by decisive advantages:

Perfect for use on the Yamaha R1 from 2015 and the Yamaha R6 from 2006

Gale Speed ​​product number: VRC17A-17B

Perfectly adjustable pressure point, radial actuation of the brake piston

Adjustable lever width for optimal adjustment of the dosage

forged pump body

Quick-release fastener for attaching to the handlebars in 3 variants possible depending on the area of ​​use

Top vent for quick venting of the brake pump

for handlebars with 22mm diameter

for brake line banjo bolts with M10x1 thread

The brake line is installed vertically from below

Recommended brake fluid DOT4 or DOT 5.1

The VRC radial brake pump with vertical adjustment and 19 mm. Piston diameter, is characterized by decisive advantages:

Gale Speed ​​product number: VRC19A-17B

Perfectly adjustable pressure point, radial actuation of the brake piston

Adjustable lever width for optimal adjustment of the dosage

forged pump body

Quick-release fastener for attaching to the handlebars in 3 variants possible depending on the area of ​​use

Top vent for quick venting of the brake pump

Handlebar with 22mm diameter

Brake line banjo bolts with M10x1 thread

The brake line is installed vertically from below

Recommended brake fluid DOT4 or DOT 5.1

Illustration and pictures may differ from the original

De VRC radiale rempomp met verticale verstelling en 19 mm. De zuigerdiameter wordt gekenmerkt door beslissende voordelen:

Gale Speed-productnummer: VRC19A-17B

Perfect instelbaar drukpunt, radiale bediening van de remzuiger

Verstelbare hendelbreedte voor optimale aanpassing van de dosering

gesmeed pomphuis

Snelsluiting voor bevestiging aan het stuur in 3 varianten mogelijk afhankelijk van het toepassingsgebie

Bovenventilatie voor snelle ontluchting van de rempomp

Cliponbuis diameter van 22mm

Remleidingbanjobouten met M10x1 schroefdraad

De remleiding wordt verticaal van onderaf geïnstalleerd

Aanbevolen remvloeistof DOT4 of DOT 5.1

Afbeelding/afbeeldingen kunnen afwijken van het origineel

Gale Speed ​​​​Reservoir Kit for clip-on handlebars with dark reservoir

This kit for the Gale Speed ​​brake master cylinder contains:

1x GS32, white oil tank reservoir for master cylinder 32ml.

1x brake fluid resistant connection hose for mounting the reservoir to the brake master cylinder.

A simple black coated bracket for mounting with a clip-on handlebar

It is the ideal upgrade for mounting all Gale Speed ​​​​VRC, VRD and VRE brake master cylinders and of course also for all other aftermarket universal brake master cylinders on the market.

These Galespeed products are truly of the highest quality.

Gale Speed ​​​​​​Reservoir-Kit für Stummellenker mit dunklem Reservoir

Dieses Kit für die Gale Speed-Bremspumpe enthält:

1x GS32, weißer Öltankbehälter für Hauptzylinder 32ml.

1x bremsflüssigkeitsbeständiger Verbindungsschlauch zur Montage vom Vorratsbehälter zur Bremspumpe.

Ein einfacher schwarz beschichteter Halter zur Montage an einem Stummellenker

Es ist das ideale Upgrade für die Montage aller Gale Speed ​​VRC-, VRD- und VRE-Bremspumpen und natürlich auch für alle anderen Aftermarket-Universalbremspumpen auf dem Markt.

Diese Galespeed-Produkte sind wirklich von allerbester Qualität.

perfectly adjustable pressure point through radial actuation brake piston

the 12mm. thumb brake pump operates the rear brake cylinder i.e. the foot brake can also be used and installed with a extra Gale Speed part/connector.

lever length adjustable from 80-100mm.

lever length adjustable from approx. 20mm. from optimal adaption to the driver

weight: only 180 gram.

milled pump body made of high-quality A 6061 aluminium

black hard anodised

depending on the application attachment is possible with a 50mm. clamp on the fork leg or on the handlebar (22mm) with handlebar holder

brakeline opening on the side

for brakeline banjo bolts with M10 x 1.0

2x M6 mounting threads

recommanded brake fluid DOT4 or DOT5.1. Please ask. We have Motul RBF700 DOT4 in stock

we have a Gale Speed stock

installation custem in our workshop is possible

clamp or the handlebar holder for mounting must be ordered separatly

PM for any questions about stock or other.

Die "Race" Version der Bullet Slider ist so kurz dimensioniert das Kühler und Motorenteile geschützt werden. Sie wurden jedoch so kurz wie möglich gestaltet so das die gefahr des einhakens an Curps usw. so gering wie möglich ist. Bullet Frame Slider: Set: Beide Seiten - RACE-Version Renndesign – Für die Montage unter oder bündig mit der Verkleidung, wodurch das Umkippen des Fahrrads praktisch eliminiert wird. Reduzierung von Schäden am Rahmen und anderen kostspieligen Teilen. Bietet in Verbindung mit Motorgehäuseabdeckungen einen weiteren Punktkontakt zum Gleiten Sicher und sicher - Das Aluminiumrohrdesign absorbiert Stöße und Verzerrungen. Der Kopf der Schraubenkappe sitzt nur 5 mm von der originalen Montageposition entfernt, wodurch die Hebelwirkung minimiert wird Gute Arbeit – Hergestellt nach den gleichen hohen Standards wie der Motorschutz, wodurch ein sicheres und effizientes Produkt entsteht. Kostengünstiger Ersatz für Geschossformteile verfügbar (CPM-3)

• All covers are screwed and not glued
• Very quick and easy assembly and disassembly
  
• High quality optics 
• Matching screws included
• Only these protective covers have been tested by the FIM and are therefore approved in all national and international racing series or in most racing series.